Noodle gears () Gear) The reason for the wear and tear of the speed-reducing machine is due to the quality problems in the process of manufacturing (guò chéng) of the speed-reducing machine. Emerson); The second is that the process equipment (shèbèi) was wrongly selected and thermal power (i.e. the amount of the work performed by the object in a unit time) was not sufficient to produce it. Produce) Process requirements, resulting in load during operation (load Large, hidden defects are gradually exposed, resulting in (a) cause Finally, the gear pay was exhausted and damaged, and the teeth were severed. fracture The equipment is scrapped. Therefore, the use of a hard-to-penetrated gear-reducing machine must be carefully chosen.
Improved hard-noodle gears (Gear) Slower () Retarder Irritation measures (means problem-oriented solutions)

　　(1) and production Produce) The factory will negotiate and the middle gear will be used () Gear Axis materials () Material From 20CrMnTi to 20CrMnmo to improve its integrated mechanical performance and life expectancy () lifetime)。

　　(2) Adjusting the pressure to reduce the load to avoid cryogenic runoff, thus ensuring that no brakes are caused by overpowering the roller. (Ha'aretz, Jerusalem Post, 29 October) Retarder Thermal power (i.e., the amount of the work done by the object in unit time) has decreased (i.e., the amount of the work done by the object in unit time) descend)。

　　(3) Improved speed-cutting machines Retarder (b) Environmental conditions, force-blowing, contributing to lower temperature of oil in slow-down bodies (e.g. reduce I don't know.Planetary gear decelerator.The drive equipment, which is usually used for low-speed, large-twirling rectangulars, can also achieve the desired speed-reducing effect of a few of the same principle gears, and the ratio of the teeth to the size of the gears is a moving ratio. As the speed-reducing industry continues to develop, more and more firms are using the speed-reducing machines.

　　(4) Carefully maintain operational controls, enhance spot checks and ensure lubricant cooling (cooling) the quantity of oil and the timely replacement of media to ensure the quality of the oil.Hard-noodle gear brakes.To achieve a particularly low rate of output rotation, it can be achieved by connecting two gear-reducing machines. When this is used, the power of the configured power must depend on the speed-reducing machine ' s extreme output-reverse, rather than the power of the machine to calculate the speed-reducing machine ' s output-reverse. Hard-dent-reducing gear-reducing machines are the most efficient of all types of transmissions, which are much more efficient than snail-releases. The efficiency of the gear-reducing machines is determined mainly by friction of gears and bearings.

　　(5) Plan to increase the cycle of oil routes continue Facilities (shè shbe); external fuel tank pumps (shè shbe) Deep well pump) Replacing small-capacity oil tanks with liquid flow, further reducing (reduce)Cool () cooling It also improves lubrication and exposure.