Speed-reducing machines Retarder) Rusty protection () antirust) Layers are volatile flammable gases.Planetary gear decelerator.In contrast to other speed-reducing machines, planetary speed-reducing machines are rigid, high accuracy (within 1 minute for a single stage), high-motion efficiency (97-98 per cent for a single stage), high rectangular/height ratio, life-long exemption, etc.Hard-noodle gear brakes.When you open your eyelids, the flames are strictly prohibited. antirust) Layer.
       Speeding machines, except where specified (gubert düng) Retarder if stored in a dry and frostless environment, the internal rustproofness (antirust In the family of speed-reducing machines, the planet's speed-reducing machines, with their small size, high rate of speed-reducing, wide range of speed-reducing and high-precision, are widely used to serve electrical, step-up, straight-flowing, and other transmission systems. The effect of this is to reduce the rate of rotation to increase the twist and reduce the rate of movement inertia of the load/power. The quality date is calculated from the date of shipment.
Speed-reducing machines Retarder) Must be stored in covered areas, which require rain, sun, frost, wetness, and are not exposed to the open environment, otherwise it is very easy to produce condensed water within the speed-reducing machines () condensate water It's rusty. It's rusty.
  If the speed-reducing machine Retarder) in a wet environment or for storage for more than six months, be careful (attention Special protection against rust () antirust) measure (means problem-oriented solution), otherwise it is prone to speed-reducing rust and damage
  If the speed-reducing machine Retarder) in a wet environment or long-term storage for more than six months, on the basis of lubricant (Lubricating oil) or the specific case of the axle seal () Condition) with the following types of internal preservatives: 
   Cogs (with Gear Oil for internal protection
     Beam-spattered lubricant system. system Speeding machines (including: recycled lubrication systems, centralized lubrication systems, etc.) Retarder) and contact axial seals can be injected into the right work oil and added to the lower of the breathing valve.
    Internal protection with special protective agents